1 / 5
Bambu Refill on Prusa Spool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Repurpose a Prusament spool to fit Bambulab refills.
- Rating
- 4.75 / 5
- Likes
- 21
- Downloads
- 156
- Makes
- 7
- Views
- 1,533
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU Lesser General Public License
Bambulab filament refills do not fit on Prusament spools because the core diameter on Prusament spools is larger (100mm > 81.5mm).
With this model, you can build a custom spool that can fits Bambulab refills from an empty Prusament spool and some screws.
Features
- Repurpose the polycarbonate parts of a Prusament spool instead of throwing them away.
- Filament-saving: can be printed from ~45g of filament, less than half of what's needed for a typical Bambulab master spool.
- Potential downside: the reassembled spool is 110mm wide (79mm if the protruding bits are cut off). Either way, it will not be AMS compatible.
Materials
- 45g of filament
- 8x M3x20 screws, doesn't matter if they are cylinder or hexagon head.
- M3x10 work as well, but are more finicky to assemble.
- 8x M3 hex nut
Print Instructions
- enable supports for the bottom 10mm (anything above prints without supports)
- random seam position recommended
- 10% infill is sufficient
Model Customization
Custom dimensions can be configured via the OpenSCAD source files, located at https://github.com/mbugert/openscad-projects/tree/main/bambu_refill_on_prusa_spool