1 / 2
Button Top Adapter/Spacer (v2) for Emisar D18
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A button top adapter for the Emisar D18. This one uses brass buttons instead of magnets.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Modified the design so it uses the brass buttons from the Convoy 4x18 and 3x21 buttontop adapters/spacers. This should be safer to use, and also have a lower resistance.
To assemble:
1) Push out the brass buttons from the original Convoy adapter.
2) Ream the holes on the new part, using the tip of a knife or similar, until the brass button nearly fits the hole.
3) Make sure surfaces are flat on top and bottom, also using a knife or similar
4) Push in the brass buttons.
5) Install in your flashlight and enjoy!