Barb hose fitting to garden hose adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.40 – €1.71 net (excluding VAT)
For file: Rain Barrel Overflow Outlet Adapter GHM 50deg_0.2mm_PLA_215C_1h35m_20g.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.56 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This adapter fits inside a barb fitting and provides a GHM output connector
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter to convert a barb hose fitting (such as my rain barrel overflow) to a male garden hose outlet. By measurement, the fitting is about 29mm ID with a 2 degree taper. The adpter is just inserted with a bit of force and stays there.
Printing instructions
- Print the .stl file as oriented (GHM end on the print bed).
- With good bed adhesion, no supports should be needed.
Usage instructions
- Gently insert the smooth end into the barb fitting and push until secure.
- Attach the garden hose and enjoy.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., angle of the garden hose end, diameter or taper of the smooth end), send me a message and I'll see what I can do.