Wera 8790C Wheel Impaktor Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic Casing for Wera 8790C Wheel Impaktor
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 47
- Makes
- 1
- Views
- 303
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
This is a simple design for the Wheel Impaktors from Wera. It is inspired by the magnetic iFixIt Box and this model.
However, I found the existing solutions either unsophisticated or too complicated design wise.
This is an easy-to-print and optional assembly with a pleasent yet easy simple design.
The window makes it easy to color and numerically identify the sockets, additionally they are also identifyable from the top case.
It is designed to just use the bottom part, without the top case as it just finishes the design and keeps the sockets free of debre.
Assembly
You will need 8 6x3mm neodym magnets.
Print Settings
Print with text facing downwards.
Use filaments appropriate for the intentended use.
- 3-4 perimeters
- 0.2-0.35 layer height
- 0.4-0.8 nozzle
For ABS, print slower and on low to no fan due to the big parts and avoid warping.
I used generic ABS, 30% fan, 4 perimeters, 0.3 layer height with an 0.6 nozzle, 13% infill and speeds around 200mm/s.