Tank shaped z-axis motor visualizer for Prusa Mini/+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tank shaped z-axis motor visualizer for Prusa Mini+ with an articulate turret.
- Rating
- 4.8 / 5
- Likes
- 42
- Downloads
- 224
- Makes
- 11
- Views
- 2,165
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tank shaped z-axis motor visualizer for Prusa Mini+ with an articulate turret.
My Prusa Mini looked like a tank after the base upgrade, so I thought it would be cool to add a battle tank visualizer.
This base design is from thingiverse here:
https://www.thingiverse.com/thing:1755149
I resized it to fit the Prusa mini z-axis and modified it so that the turret can rotate freely.
I printed it with same orientation as in the stl file with no supports at 0.2 mm layer height.
The material is Overture's grey PLA.
Assembly instructions:
The turret gun just snaps in to the turret and you can adjust it's angle.
I used some hot glue to add a small magnet to the base of the turret.
There is no need to stick the tank body to the z-axis motor, but you can use some very thin two sided tape if you like.
I just positioned the base over the z-axis motor and just slid in the turret assembly.
Watch it in action here:
and here: