Tank shaped z-axis motor visualizer for Prusa Mini/+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tank shaped z-axis motor visualizer for Prusa Mini+ with an articulate turret.
- Ocena
- 4,8 / 5
- Polubienia
- 42
- Pobrania
- 224
- Wydruki
- 11
- Wyświetlenia
- 2165
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tank shaped z-axis motor visualizer for Prusa Mini+ with an articulate turret.
My Prusa Mini looked like a tank after the base upgrade, so I thought it would be cool to add a battle tank visualizer.
This base design is from thingiverse here:
https://www.thingiverse.com/thing:1755149
I resized it to fit the Prusa mini z-axis and modified it so that the turret can rotate freely.
I printed it with same orientation as in the stl file with no supports at 0.2 mm layer height.
The material is Overture's grey PLA.
Assembly instructions:
The turret gun just snaps in to the turret and you can adjust it's angle.
I used some hot glue to add a small magnet to the base of the turret.
There is no need to stick the tank body to the z-axis motor, but you can use some very thin two sided tape if you like.
I just positioned the base over the z-axis motor and just slid in the turret assembly.
Watch it in action here:
and here: