Gweike G2 (150x150mm) Protective shield Extension to 256mm focus distance.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An extension to the protective shield to give real focus at a distance of 256mm instead of 261mm .step file incl.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Step file included, so you can push/pull the bottom face to the distance of your liking.
M3 x 10mm bolts and nuts for permanent installation.
Dremel or similar to drill 3mm holes.
Printing orientation for the joints: vertical, with brims to keep them steady.
Print the Shield with no supports - as is. I used variable height and it worked out well.
Use PETG - use as many perimeters needed for 100% fill.
Use Brim - separation 0.35 mm for PETG
I used 0.8mm nozzle for the big part and .6mm for the joints.
The fan is on the BACK side of the shield. JOINTS are placed front and back.
Don't worry, you can't go wrong with orientation or how the parts fit together.
Next version shall have adjustable height for +- 5mm, using the same holes, but different joints.