D-Battery Holder / Storage Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple vase mode print for storing and organizing D Batteries
- Rating
- 4.333 / 5
- Likes
- 19
- Downloads
- 200
- Makes
- 2
- Views
- 416
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the brilliant used of vase mode on his AA and AAA battery storage trays, here , I made a set for D batteries, and another for C batteries. These use the same vase mode technique to print very quickly while using very little filament. D Batteries can be a bit heavy, so making the bottom layers a little thick can help keep the holder from cracking when lifted.
Print in vase mode, with 4 bottom layers for best results. I used PLA for my prints, but any filament should work just as well.
Since these are in Vase Mode, be careful when lifting them while full of batteries. C and D batteries are pretty hefty, and it would be possible to snap the tray. If you do need to lift the tray regularly, print in non-vase mode. It'll take longer and use more filament, but it will also be a LOT stronger.