NeoPixel LED Menorah
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 79
- Makes
- 2
- Views
- 777
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython. A push button allows you to light up a NeoPixel LED on each night of Hanukkah.
Learn Guide: https://learn.adafruit.com/neopixel-menorah/
This minimalistic design features parts that snap fit together and print without any supports. The assembly is modular and easy to put together.
The bulbs are 3d printed in translucent PLA and the NeoPixels are fitted inside the candle holders.
Code on GitHub
https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/NeoPixel_Menorah/code.py
Parts
QT Py RP2040
https://www.adafruit.com/product/4900
NeoPixel Button PCB
https://www.adafruit.com/product/4356
16mm Push Button
https://www.adafruit.com/product/1503
3-pin Cables
https://www.adafruit.com/product/4721
2-pin Cables
https://www.adafruit.com/product/4720
M2.5 Hardware Kit
https://www.adafruit.com/product/3299
USB-C Cable
https://www.adafruit.com/product/4696