1 / 7
Arduino UNO with Ethernet shield case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arduino UNO with Ethernet shield case
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 127
- Makes
- 1
- Views
- 642
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
For a little project with use of an Arduino UNO with Ethernet shield I needed a small but strong case which should be fixed with a Ø31mm magnet.
Because I could not find an Arduino UNO case which also can hold the Ethernet shield I created this one.
Hardware used:
- Aquino UNO
- Ethernet Shield W5100
- Magnet 25kg Ø31mm
- Barrel jack connector Ø11mm
- Some M3 screws and nuts in different length
Printing instructions:
- 0.3 draft profile
- No supports needed
- No brim needed
- Textured sheet used
Happy printing =)