1 / 4
PAM8406 (DollaTek) 5V Amplifier Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small case for the DollaTek 5V amplifier with possibility to screw mount.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 82
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
I created this case for the DollaTek PAM8404 micro stereo amplifier to allow it to be mounted under a table. On the bottm there are 2 recessed holes for M3X12/16 countersink woodscrews. The lid for the case can be fixed with 4 M3X22 screws.
I used PETG to print and the M3X22 screws can be “forced” into the holes, since no huge load is on them.
Print settings:
Material: PETG/PLA+
Layer Height: 0.2mm
Walls: 5
Infill: Grid, 25%