1 / 5
Cable Clip Lite (64 sizes) | Closed Version
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick-printing clip to attach and route thin cables and wires. Includes 64 sizes with channels from 6x6 mm to 20x20 mm.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Quick-printing clip to attach and route thin cables and wires under a table top in various sizes. Only uses about 0.9 g of material for the smallest version and 2.2 g for the largest.
Provided are 64 different variations in size, ranging from 6 mm x 6 mm up to 20 mm x 20 mm for each of the routing channels. In contrast to my open and flexible cable clip, this variant is closed and follows a more traditional design.
Each variations is available both as 3MF and STL file.
Print Settings
- Print on the side (model files are already correctly oriented
- For best results use PETG, however PLA should work, too
- 0.2 mm layer height
- 0.4 mm nozzle
- 2 perimeters
- No infill required, up to 25 % grid infill doesn't hurt though in my experience
- PrusaSlicer speed profile