Lightsaber Stand Display Case for Lukes Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display Case for Lightsaber replica (Luke's Lightsaber)
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 103
- Makes
- 0
- Views
- 897
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Here's a Display Case I made for Luke's Lightsaber, that I made during my apprenticeship as an Industrial mechanic.
Credits to… !
The “Arm” is a modified version of 3dprintingworlds Lightsaber stand.
The “Claw” was also modified by me to give it a more Imperial-esque look, that I got from gandy.kasper Lightsaber stand.
Quick Overview:
- Lightsaber Display case for a replica of Luke's Lightsaber.
- Acrylic mirror in the back to allow an almost complete view of this beautiful saber.
- Easy DIY illumination with cheap WIFI LED Strips and space for a Diffusor.
- Simple Slot-In parts.
- Filament saving Tolerance test available.
- Super Inspirational quote in Aurebesh.
- I am a Jedi, like my father before me ~Luke
Printing Recommendations:
- I would highly recommend using a Matte Filament, personally used Matte Black PLA from JAYO, that I got for 15€ from Amazon.
- OrcaSlicer Tree-supports (Style: Organic), especially for the Arm Top V2.stl and Hilt.stl.
- Infill density: 10-15%.
- Printing orientation as in the last image.*
- It's recommended to print the Lid tolerance test.stl first to ensure that the printers dimensional accuracy or the acrylic panels are properly sized before wasting precious filament.
Parts List:
- Acrylic Panels (3mm thick):
- 1x Clear 176mm x 330mm.
- 2x Clear 170mm x 330mm.
- 1x Mirror 176mm x 330mm.
- 1x Diffusor/White-Opaque 149mm x 149mm.
- Printed Parts:
- 1x Base V2P: no supports.
- 1x Imperial Grid-XXX: supports needed! *
- 149 Version could theoretically fit a 150x150mm diffusor I would recommend 149x149mm to be safe, 145 Version was made because I misjudged and ordered 145x145mm.
- 1x Lid: no supports.
- 1x Hilt: supports needed.
- 1x Arm: no supports.
- 1x Arm Top V2: supports needed.
- Illumination:
- 1-Meter LED-Strip (WIFI and USB recommended).
* Note: The Imperial Grid-XXX can be flipped to avoid supports, I've chosen to sacrifice a bit of filament to get a cleaner surface finish.
If it doesn't bother you or have a smooth bed surface go ahead and flip it :)