1 / 6
RepRack Hanger for IKEA HUGAD 28mm with WS LCD Holder (and Pi 2 Zero w mounting) — image 1
1 / 6

RepRack Hanger for IKEA HUGAD 28mm with WS LCD Holder (and Pi 2 Zero w mounting)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

RepRack Hanger for IKEA HUGAD 28mm with LCD Holder (and Pi 2 Zero w mounting) with details in print settings

Rating
0 / 5
Likes
0
Downloads
15
Makes
0
Views
281
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

U have printed cnc kitchens RepRack Hanger for IKEA HUGAD 28mm?
U have one of em hanging in a height around your chest or easy to access/read?

I have exactly that and i use KlipperScreen on a Raspberry Pi 2 Zero W.
So i thought it would be nice to have the Klippersceen exactly on that height and not lying around on the table.

With my remix u can put in a 5" LCD touchscreen and a Raspberry Pi 2 Zero W hanging on the backside.  For the powercable i made 2 ponts where u can hold down the cable with zipties or whatever u prefer.
On the backside the Displayholder will run along the HUGAD pipe, so that it does not bend and not brake if u touch a bit harder.

I used an Waveshare 5" LCD HDMI (B) Display but nearly all 5" Displays from Waveshare should work. 

A case for the (H) of the Waveshare display u can find here https://www.printables.com/de/model/893531-5inch-5-waveshare-capacitive-touch-screen-lcd-h-ca 

Since Klipperscreen runs over wifi and ip adress u can mount it wherever u like.

I used:
1 RPi zero 2 w (mine is in a full metal case)
1 Waveshare 5" LCD (B) (mine is build into a printed case https://www.thingiverse.com/thing:6226458 ) 
a guide for setting up a Pi 2 zero w with Klipperscreen

U than only need 3 cables:

1 longer usb to micro usb (for powering the Pi)
1 short OTG Micro usb to Micro usb cable (for powering the screen inc. touch function)
1 short mini hdmi (pi zero 2w) to hdmi (for actually see something on the screen)

Print settings:

Shown in the picture
Material: i used PETG
Layer: 0,2mm
Infill: 25%
Walls: 4
Top&Bottom: 5
Supports: as u see in picture, there are 4 pints u can paint on supports. i did seamless &  concentric only on paint on supports
Printtime: for me its around 5h+. u can reduce it with double infill height or less infill or less walls (not under 3! otherwise can be to weak)

If u want it the other way around, just flip it in slicer. (mine is to be mounted on the right end of the rack.
If u want to hardmount the display (and u used the case for the LCD i mentioned above, just use m3x6x5 thread inserts and shorter screws there), u can drill 2 holes in the upper backside of the holder and put in 2 short screws throu in the backside of the Display case. 
I have enough space in the threaded inserts to put in short screws from the back of the displaycase.

Included STEP file for modify.

Tags