RepRack Hanger for IKEA HUGAD 28mm with WS LCD Holder (and Pi 2 Zero w mounting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RepRack Hanger for IKEA HUGAD 28mm with LCD Holder (and Pi 2 Zero w mounting) with details in print settings
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
U have printed cnc kitchens RepRack Hanger for IKEA HUGAD 28mm?
U have one of em hanging in a height around your chest or easy to access/read?
I have exactly that and i use KlipperScreen on a Raspberry Pi 2 Zero W.
So i thought it would be nice to have the Klippersceen exactly on that height and not lying around on the table.
With my remix u can put in a 5" LCD touchscreen and a Raspberry Pi 2 Zero W hanging on the backside. For the powercable i made 2 ponts where u can hold down the cable with zipties or whatever u prefer.
On the backside the Displayholder will run along the HUGAD pipe, so that it does not bend and not brake if u touch a bit harder.
I used an Waveshare 5" LCD HDMI (B) Display but nearly all 5" Displays from Waveshare should work.
A case for the (H) of the Waveshare display u can find here https://www.printables.com/de/model/893531-5inch-5-waveshare-capacitive-touch-screen-lcd-h-ca
Since Klipperscreen runs over wifi and ip adress u can mount it wherever u like.
I used:
1 RPi zero 2 w (mine is in a full metal case)
1 Waveshare 5" LCD (B) (mine is build into a printed case https://www.thingiverse.com/thing:6226458 )
a guide for setting up a Pi 2 zero w with Klipperscreen
U than only need 3 cables:
1 longer usb to micro usb (for powering the Pi)
1 short OTG Micro usb to Micro usb cable (for powering the screen inc. touch function)
1 short mini hdmi (pi zero 2w) to hdmi (for actually see something on the screen)
Print settings:
Shown in the picture
Material: i used PETG
Layer: 0,2mm
Infill: 25%
Walls: 4
Top&Bottom: 5
Supports: as u see in picture, there are 4 pints u can paint on supports. i did seamless & concentric only on paint on supports
Printtime: for me its around 5h+. u can reduce it with double infill height or less infill or less walls (not under 3! otherwise can be to weak)
If u want it the other way around, just flip it in slicer. (mine is to be mounted on the right end of the rack.
If u want to hardmount the display (and u used the case for the LCD i mentioned above, just use m3x6x5 thread inserts and shorter screws there), u can drill 2 holes in the upper backside of the holder and put in 2 short screws throu in the backside of the Display case.
I have enough space in the threaded inserts to put in short screws from the back of the displaycase.
Included STEP file for modify.
