Homemade printer box / Boîte pour imprimante faite maison
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€20.48 – €25.03 net (excluding VAT)
For file: allHomemadePrinterBox.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €22.76 excluding VAT (range midpoint).
- Weight reported by the author
- 213 g
- Print time reported by the author
- 26.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made my one printer box with some recycled materials. Printed in 0.2mm layer height, 20% filling with PLA+
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made my one printer box with some recycled materials.
Printed in 0.2mm layer height, 20% filling with PLA+, without support except for the hinges
The side plank have 10 mm of thickness and top/bottom plank have 20 mm of thickness.
For the screws I use ø4x30 for all the fixations except for the hinges on the door I use M5x16.
The magnets are 6mm by 1.6mm.
V2 : Rework the hinge holder to make it stronger