Quad Lock gear token for K-Edge bicycle computer mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tokens to be used in place of the inserts in K-Edge mounts to allow you to mount a Quad Lock 360 Head directly
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 83
- Makes
- 0
- Views
- 837
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
This is an adapter for use with various bicycle mounts for computers to allow you to use a Quad Lock mounting system in its place. Manufacturers like K-Edge make wonderful machined mounts, and adapting them to Quad Lock mounts makes them more versatile.
Needed parts:
Quad Lock 360 Head: https://www.quadlockcase.com/products/quad-lock-360-head-lever
(you can also use the Short Lever Head or the Weatherproof Wireless Charging Head)
Hardware:
M5 nut, no more than 3.8mm thick. I tend to use these thin nuts for builds that I cannot use heat-set nuts on: https://www.mcmaster.com/90326A231/
M3 x 0.5, flathead bolts, 10mm long: https://www.mcmaster.com/92125A130/
You may be able to get away with 8mm for these, because of leverage I wanted more engagement of threads. Shown is a Garmin Max XL: https://k-edge.com/shop/computer-mounts/garmin-max-xl-mount/
Note, that because of the size of some phones, it is recommended to use a mount that is even with the bar to clear it with larger phones. The adjustable stem mount may be a better option: https://k-edge.com/shop/mtb/adjustable-garmin-stem-mount/
Model should print flat side down with support to fill in the hex cavity. I used 20% infill; its not a part with high leverage.