Zona Paper Polishing Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an early version of a polishing station for dice making. It can use up to 7 different grits.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is my first version of a polishing station. I use it for polishing cast resin dice with 6 zona paper grits. It does require additional hardware to construct, as well as a motor. I used a spare motor I had laying around from an old microwave (not the turntable motor). Feel free to adjust it to fit your own available parts.
This build requires some electrical work, so if you are not comfortable plugging in something you wired yourself, then this might not be the best for you.
Parts Required:
- 14x 6-32 heat set inserts
- 1x 6-32 x ¾" socket cap screw
- 7x 6-32 x 3/8" socket cap screws
- 7x 6-32 x 1.25" socket cap screws
- 8x 6-32 nuts
Parts Used for My Build:
- 110V 0.34A AC Motor
- On/Off Switch (rated for the motor)
- 4x 8-32 x ¾" socket cap screws to mount motor
- Solder
- Extra Wire
- AC Wall Plug with long enough cable