Small drawer slide bumper for full extension rails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recreated to fit my specific, smaller, model of drawer slides used in an Amish chest of drawers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Print in TPU
Use .2mm layer height
Use 10% infill - enough to add a little structure but still want it to be somewhat squishy - I printed in 95A hardness (which is pretty stiff, squishier TPU may need a little more structure, but anything from 0%-10% is good for basic TPU). I just printed a set of these with 0% infill and they work just fine, they have a little more "give" so if a drawer slide is a little sticky they won't bend the metal ear they sit over.
NOTE: Use a TPU specific profile to slow down printing an appropriate amount. Also, Printing with 1 perimeter will make this feel much ‘squishier’ but it may not hold up as long. I've found that either 2 or 1 perimeters or walls are functional but 2 may hold up longer.
NOTE:
My model was *not* remixed, it was inspired by this other thingiverse object and I want to give some credit: https://www.thingiverse.com/thing:5258887
I modeled this from scratch in Fusion 360 because the drawer slide stops I require for our Amish oak drawers were smaller and the shame needed to be different. Lastly, I wanted to try and build it using parameters so I can resize easier in the future. While this, technically, is *not* remixed, it is inspired from the work done by this person - thank you!