1 / 6
Charging station - Wall mount - Phone , Tablet , other devices
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wallmounted charging station with 21mm space slots. For Phone , Tablet and other devices (headphone, earplug, ...)
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 140
- Makes
- 1
- Views
- 1,016
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Maturity: Very good.
- 8 prototypes.
- In use since 2024/04.
Personally I fixed my charger with some double-sided tape inside the charging station.
Accept charger with the sizes:
- Up to 150x30mm
- Up to 75x40mm
Slot space is 21mm.
Printing recommendations:
- Layer height: 0.2mm
- Print all with perimeters to avoid artifacts. I set it 20 to be sure. Walls are relatively small then the part can be totally filled. And I suggest for rigidity that the part is totally filled.
- Can be printed with “wood” filament (my choice). Then a 0.6mm nozzle is required.
- Can also be printed with a 0.4mm nozzle with another kind of filament.
- For printing reliability you may add an inner brim.