Abus lock key sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.44 – €0.54 net (excluding VAT)
For file: Sleeve C_0.1mm_PETG_MK3S_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.49 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 39 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Couple of key sleeves for Abus lock keys to make them easy to identify if you have several ones.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 1
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
These are sleeves you can put on your Abus keys for easier identification when you have several of them.
I've made 3 versions:
- Version A: Simple cover, matching the key's keyring hole
- Printed vertically with organic/tree supports
- Version B: Cover with a slicker look, and its own keyring hole
- Printed vertically without supports
- Printed horizontally with supports
- Version C: Same as version B but with a flat side for easier printing horizontally, and allowing you to add some text or an icon
- Printed horizontally with supports
I've used PETG filament for all these. I'd favor any filament that's not too brittle.