Replacement Clamp Pad for Kreg K2/K2000/K3/K3MS/K4/K4MS Pocket Hole Jigs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement clamp pad for Kreg Pocket Hole Jigs
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 168
- Makes
- 0
- Views
- 1,062
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
After many years of hard work and living outdoors, the rubber clamp pad on your Kreg K2/K2000/K3/K3MS/K4/K4MS Pocket Hole Jigs will eventually deteriorate and crack to pieces… This part is a direct-fit replacement to be printed out of flexible material.
This was printed in Inland TPE, .2mm layer height, 80% infill. Apply an extra layer of glue stick to the print bed to assist in part release from bed.
The bolt that holds and adjusts the clamp pad unscrews from the jig assembly. That bolt can then be inserted into clamp pad at 20 degree angle, as it is inserted and moved to the center of the pad, the bolt shank rotates to be perpendicular to the pad face. Reattach assembly to jig and continue working!
Print instructions
Download. Slice. Print. Repeat if necessary.
How I Designed This
My own original design in OpenSCAD. Patterned on original part, then tweaked and iterated until I was pleased with the result.
Actions:
Download
Take this model for a ride on your printer.
Get Rewarded for Making
Don't forget you can earn Prusameter Rewards (free filament and other cool rewards!) for printing out models and posting a photo of your Make here on Printables.
Modify
If you feel the calling, edit and improve the design and post your results with this model listed as the Remix source.
Feedback
If you have any questions, suggestions, or problems that you'd like to discuss with me, please feel free to message me. I'm always willing to discuss my models, your ideas, 3-D design, and 3-D printing.
Explore
Check out my other models here on Printables.Com.