5,673 models
All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
All printable parts for your Original Prusa i3 MK3S. Note these are the parts for the older MK3S version, not the newer MK3S+! Some of the parts are not compatible! For MK3S+ parts, see the respective printable parts. Attention,…
All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…
V2 for Prusa CORE ONE L, CORE ONE +, XL and MK4S now available! This is a remix of the Rugged Box from Whity with six different Prusa versions Changelog for V2 - available for Core ONE, Prusa XL and MK4S Updated size of the box Updated…
My MK3 printer stands on an Ikea Lack table, which is an excellent amplifier for the vibrations of the printer. So I designed these feet, and they do a good job without making the printer too wobbly. A low profile version and a small…
Welcome to OpenFigure3D! This is our first fully 3D-printable articulated figure: Iron Man MK3 , as seen on the first MCU movie Iron Man of 2008. The designer is Dany Sánchez , who is also behind MiniWorld3D . Further below are the full…
A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…
All printable parts for your Original Prusa i3 MK3. Note these are the parts for the initial version of the MK3. Not MK3S or MK3S+. For upgraded printers, please see the MK3S or MK3S+ printable parts. Print instructions: Use Prusament…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
All printable parts for your Original Prusa MK3.5(S). MK3.5(S) upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK3.5 assembly manual Original…
Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools. Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of…
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
Clamp X motor cable sleeve (with zip tie) to this and protect cable against mechanical constraints. Points cable down and slightly back.
Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.
A cable clip for the LCD cables. Should be a nice tight fit and hold them very securely. Jan 21 - Added an upsized version. The original was supposed to move relatively freely, then be held in place by the cables. The upsized one should…
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
A High resolution model of the Iron Man Mk3 helmet from Iron Man I. Suitable for cosplay. model by Official3D @Official3D follow him <33
Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports
Flow calibration tool specifically for flexi or articulating 3D prints, like our Spiders. If your Flexi models are fusing together, feel too loose, or it seems like small gaps are being fused, you likely need to adjust your Flow Rate for…
A side drawer for Mk3 I3 Edit 2021-01-29: Add the file for the left drawer. Edit 2021-02-01 : Addon to make it easier to assemble (nuts_helper_tool) Edit 2021-02-02 : Add No support drawers with 45° handle (files have 45d in name) Edit…
I liked the design of the https://www.prusaprinters.org/prints/14150-prusa-i3-mk3-filament-guide filament guide but it did not quite fit my needs so I made a longer version for my single spool holder. Clip has also been modified to grip…
We have created a Chess Set that is great for travel and families. All the colours are 3D printed separately, so you do not need an AMS type system. (This also cuts down on printing time) First print the boards and then a set each of the…
2020-Dec-29: Deleted rubbish. Update the version with bigger mash and smaller front to prevent hittig the leadscrew 2020-April-06: Added new version with much smaller mash - only 0.4mm thick - to pretend hitting the leadscrew at homing…
Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…
Adjustable phone stand with spring-loaded hinge and mechanical lock. The curved herringbone contact surface supports the device across a wide area while maintaining grip and controlled positioning. The indexed side knob compresses the…
This is a completely redesigned fan shroud for the Prusa i3 MK3S/+, which not only delivers fantastic airflow like the old Mk3 shroud did, but which also sits far away from the heatblock and will not melt when printing at high…
The new OpenRC Tractor is finally here!! It's been almost two years since I started working on this new MK3 TEA20 project. Now, after hundreds of hours of design, test, print, redesign… it’s finally here and all the hard work has paid…
Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…
(IMPORTANT) Please download the User Guide for HULA v1.0. I do my best to double-check and test the print profile I created. They are up to date with the latest changes made to the designs. If you wish to purchase ready-to-use HULA feet…
Print in vase mode without bottom layer. With the Mk3 you absolutely need the new bearing clips https://www.prusa3d.com/product/bearing-clips-mk3s/ The mirrored part cover also the other end of the cables.
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Just changed the appearance using mesh modifiers in PrusaSlicer. Print instructions Printed using Prusament PETG. Could be printed without MMU. Requires 2 filament changes if you want the multi color.
Attention: These files are for version MK3S light, MK3S and MK3S+. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed therwise the function of the extruder may…
This is just a simple Allen Key Holder that you can mount on the top of your Prusa Printer to have them ready at all times. There are four Versions available. One for a tighter Fit of the Hex-Mount and one for a loose one. I recommend the…
Searching for a better fan duct, i found this this (thx to xander1) https://www.thingiverse.com/thing:4124587 The initial tests weren't bad, but the airflow didn't fully reach the rear of the model. So I copied the design and gave it a…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
I was looking for a set of side boxes to store the accessories for the printer and found the ones created by KalleKnall (see section Remix). I liked the simplicity of it (especially the mounting brackets) and that it did not require any…
If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Quickly designed this fairly quick print desk tidy. It has 2 parameters all around so it prints quite fast for its size (around 9 hrs with the included g-code). This is for MK3 only. As soon as you change the scale, the wall would be too…
Pre-Sliced the Temp-Tower with the Standard PETG Profile in PrusaSlicer and added the temperature changes accordingly. USE THE .GCODE ONLY IF YOU HAVE AN PRUSA MK3, MK3S or MK3S+ IIT HEATS UP TO 160° FOR BED LEVELING, FINAL TEMPERATURE…
This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…
Do not cut through all. Best results found to be using a default settings: Layer height - 0,15 quality 0,4mm nozzle Prusament PLA or PETG
MODEL DETAILS A clip-on nozzle holder compatible with the MK3 range of printers. Designed for RapidChange Revo Nozzles. A second model is provided with adjusted tolerances and alternate geometry for printing with flexible filaments.…
I liked the idea of the MINI 3 wing knob for the MK3 that @SethBon created. However, after I printed it, I realized that the thumb knob part is flat, and I prefer the indentation of the original part. So I pulled it into Fusion 360,…
Filament guide for Prusa i3 MK3's new double Spool Holder Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm Infill: 10% - 15% Filament: Prusa PLA Orange
Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…
Customization of Arbitrary hex (Allen) key holder to fit the keys included with the Original Prusa i3 MK3 Kit . 3 mm 2.5 mm × 2 2 mm 1.5 mm × 2 Print instructions I printed using the then-supplied filament (Prusa Silver PLA, not…
I have a vast collection of pep files from other modlers I collected over the years when I was into pepakura making, This is the Iron Man Mk3 since one and two are already here on thingyverse, I'll work my way through all the versions,…
Attention: These files are for version MK3. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed therwise the function of the extruder may be impaired. The…
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
A small hook that rests on top of the PSU and hooks around the frame. Perfect for a scraper or something else that you want in short reach. Sporting glorious hexagon cutouts and a hexagon-shaped hook it is a perfect compliment to all…
Just a model of the Prusa i3 MK3 that you can easily import into PrusaSlicer 2.1.0 Print instructions No printing needed, just import the stl-file into your PrusaSlicer right unter "printer settings > bed shape > Model"
Yet another toolbox for MK3. I didn't want tools hang on side of printer, so designed one what sits on top of PSU. Same size (footprint) as new, black, PSU. There is also add-on for taller items. It must be glued on. Print instructions…
Test the limits of your printer! Pin Support Sphere ChallEnge is a way of testing your printer's capabilities. It is designed to be hard to print, so only well-calibrated printers with quality filaments will print out a nearly perfect…
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame. You can find suitable housing tops from me Haz1…
Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…
Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…
New: The body kit is now compatible with all versions of the Prusa i3 from MK3 to MK4S! Let me introduce you to the Bulletproof Wide Body for the Prusa MK3 and MK4 series! A machine that runs and runs and runs gets a look that is equal to…
Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…
We made a bust statue of Tony Stark / Iron Man that is easy and quick to 3D print . Available in 2 versions: Mask open to see Tony's face Mask closed It comes with an ARC reactor pedestal base . OpenFigure3D is bringing you busts based on…
CLICK HERE FOR THE ASSEMBLY GUIDE Available for $119.99 CLICK HERE TO BUY DELACK AT 3D SOURCERER.COM CLICK HERE TO BUY DELACK ON OUR AMAZON STOREFRONT AVAILABLE IN THE USA ONLY! MMU3 COMPATIBLE
Update: 6 june 2019. I've made a new version with even more clearance, and even more robust walls. It's visible in orange in the screen grabs (V1 in cyan, original in red). Keep in mind that this version is designed for use with socks,…
The stock shroud tends to warp and melt easily, does not provide good coverage for the sides or back, and is only mounted with one screw. I wanted to improve on all of those deficiencies. While I'm quite pleased with the result, my…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 New version of the Z-axis top with additional ball bearing for more stable guidance of the trapezoidal spindle. I don't know if you really need it…
Upon assembling my new MK3S Kit I noticed that the Autoload Function did not work and the IR-Sensor always showed 1. A quick search led me to this entry in the Prusa Forum:…
Based on the original Thing from K_Lab - thanks for the source Fusion 360 files: https://www.thingiverse.com/thing:3533859 and the remix from Theo Tinjum:…
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
I think it will come as no surprise when I say that many of us here at Prusa Research are not just technology geeks - we’re avid gamers as well. Some of the luckier members of our team already got their hands on the PlayStation 5 (even Jo…
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Keep your Prusa i3 steel sheets organized and dust-free with this sturdy, under-table storage solution. Designed for all recent Prusa i3 models with a standard bed size, this holder will not fit the Prusa Mini due to its smaller bed…
This is my third Core XY conversion kit for the Ender 5 with Linear rails. Previous versions here, updates at the bottom of the page. MK2: https://www.thingiverse.com/thing:4777606 Mk1: https://www.thingiverse.com/thing:4650517 As per the…
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
The standard Prusa i3 MK3 spool holder is almost totally vertical which makes it take up the most possible space in the height direction. I had a height restriction due to the shelf my printer was going to sit on, so I designed this as a…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
v23: discovered that the bearing holes in the Y carriage were over-sized I have corrected them to measurements of my own printer. v22: added holes for the power connection on the heatbed and also chamfers to the 9 mounting holes. v20:…
NOTE: Since printables.com (at the time I first published this) had no function to upload (respectively download) directories, I uploaded this as a multipart project. The file set on this model page only contains the basic files to build…
I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…
I wanted a small side frame-mounted tool box to store pliers, snips, allen keys etc. for my Prusa MK3S. Whilst there are a few options on Thingiverse, for a variety of reasons, none really fitted the bill. I was also keen for it to be…
I decided to make a toolholder that simply clicks on the frame and rests on the power unit. It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes. so there's room for 4 alan keys…
This is a wall mount holder for the Prusa MK3 and MK3s steel sheets. It´s easy to take the sheets out, because it is arranged in stages. I designed two versions: SheetHolder3x and SheetHolder5x
Simple bed level test - 5 x 5 grid of 25x25mm squares layed out in the shape of the Prusa MK3 Printbed.
I really liked the latest changes to the Prusa i3 MK3 Extruder. However, I don't really like pulling the part cooling air from the heated bed. 1. Maybe a little warmer ?. Cooling off the bed faster? The 45° fan configuration makes that…
Description This fan shroud is very easy to mount: simply push its intake into the output port of the blower fan. It ‘clicks’ into place and is held securely in the right orientation without any screws or other parts. It is also very easy…
Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
I wanted a bin for the side of my Prusa i3 MK3*s to catch the filament that may droop down while the nozzle is heating, then fall off the left side of the printer as it goes through the auto-leveling sequence. These small 1-2" strings of…
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
