1 / 2
Pull Up Bowling Pins
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bowling pin shape rods for rockclimbers training for grip strength on the pull up bar
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 29
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Share Alike
Multiple sizes:
- The pins are 120mm tall, with the thickest middle part at 30, 40, 50, 60, 70, and 80 in diameter (mm).
Printing:
- The pins can be printed without support.
- I recommend printing in fuzzy skin mode for the surface to have a good grip.
Hanging:
- Each pin has a 10mm diameter through hole in the center. For my application, I made a loop through the pins with a length of cheap paracord and tied a knot at the bottom to hang them. If your cord is too thick, you can scale up the model accordingly.
Disclaimer:
- Depending on the material of your filament, the cord you use, your body weight and other variables, the pins might fail. Use your best judgement and be careful.