1 / 6
Sony PMW-F3 Handle Replacement Caps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY solution for anyone interested in removing the handle from their Sony PMW-F3 and replacing it with dust covers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
The files are best printed standing up (see pictures). The front cap does not require support, the back on does!
The front cap uses 2x M3 screws, the back cap uses 4x M3 and 2x M2 screws. It's best to use the original screws from the F3's handle and side panels. I'd recommend to pre-thread the small M2 holes in the back cap, as it might be hard to fit the screws otherwise.
A layer height of 0.2mm is sufficient. Go to 0.15mm for extra detail!