1 / 3
Zeiss Mounting plate M - 100 mm Petri dish — image 1
1 / 3

Zeiss Mounting plate M - 100 mm Petri dish

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Snaps on the stage of a zeiss microscope (M mounting plate format) and allows you to secure a larger petri dish

Rating
0 / 5
Likes
1
Downloads
26
Makes
0
Views
193
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I created this model because I got tired of not having a mounting frame for larger petri dishes on the confocal microscope in my lab.

It looks like Zeiss refers to that format of plate as “M”, and I could not find a Zeiss plate for large dishes in this format online. This plate is used for “100 mm” petri dishes, however the actual diameter of the bottom piece of the dish is closer to 90 mm. (I guess 100 mm is the diameter of the larger top piece ?).

On my printed piece the notches on the top snap nicely into the metal tabs that are supposed to hold it, so I can use the stage control to move the plate. 

Printing :

I printed mine in PLA, 15% infill because it is not taking much stress. Never tested with a motorised stage so I can't tell how it would hold. Besides, this is a few euros of plastic vs a couple hundred euros for equivalent metal pieces from Zeiss. Worst case I will reprint a bunch of those, or try PETG.

Regarding orientation, I just printed flat, as shown in the model. No support for the little arches on the sides, the bridging was super clean on a Prusa MK3S+.

I did use outside and inside brims to avoid detachment since the contact area is quite low. I would however be more careful when removing the brims if I print a second one. I just ran a knife along the edges, which left some flash along them, making the piece not perfectly flat. Therefore I have to slightly play around with the fine adjustment whell if i move across a whole plate, but still very functional.

I printed in Galaxy black because it was the darkest filament I had on hand. I don't see significant reflection from the “glitters”, however I would maybe avoid printing this in shiny or clear colored filaments. 

 

I hope you find this useful :)

Tags