1 / 7
MN78 1/12 scale rear bumper with tire carrier — image 1
1 / 7

MN78 1/12 scale rear bumper with tire carrier

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A rear bumper drop-in replacement that can be printed for your MN78 rc model!

Rating
4 / 5
Likes
24
Downloads
166
Makes
1
Views
950
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is my second, and last rear bumper for the MN78 model. I plan on updating this model as needed so suggestions and feedback are welcomed. The bumper features a swing-open tire carrier, two shackles/mounts and a hitch receiver. In the pictures above, the jerry can is printed at 50% of it's original size, and the high lift jack is printed at 60% of it's original size.

The new and updated hitch (mn78_hitch.stl) is compatible with this 1:12 and 1:16 scale 14K Deckover (flatbed) trailer. Whereas the older hitch (mn78_rearbumper_hitch.stl) can be used for decoration.

Required Hardware:

  • Tire Carrier wheel mount: use original tire screw or any 1x M2.5x10mm or longer

  • Tire Carrier to bumper mechanism: 1x M2x10mm

  • Shackle and Hitch receiver: 3x M2.5x8mm

Optional Hardware (hitch assembly):

If you plan on printing mn78_hitch.stl, you will also need:

Printing Notes:

  • Everything pictured was printed at 0.2mm on a 0.4mm nozzle

  • I've oriented the parts in the direction which I found the easiest to print from.

  • The bumper will need supports

  • Use supports lightly on the tire carrier part, the mesh is thin and easily broken when removing support. This part is hands down the hardest to clean

  • Hitch and Hitch stub can be printed without support

  • Shackles is best printed with "support on build plate only"

  • I've printed mine out of PETG, but would recommend PLA as well.

Tags