1 / 4
FLSUN V400 - Speeder Pad Top Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a speeder pad holder which can be mounted at the top of the V400.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
General:
- Wanted to have the speeder pad on top of the printer and train fusion
- Still WIP but working for me (see pictures)
- Top Mount for the speeder pad
- 3 Parts can be printed without support
- Requires one 90mm M5 Rod
- Please clean the holes for the rod/pillar with a knife before as the parts have small tolerances
- Wanted to have some friction between parts so that the pad is kept in place at the poistion I choose
Assembly:
Please assure holes are cleaned! When I tried assembling the parts first the top of the pillar broke off.
- Rod gets pushed into the lower part to give more stability (after cleaning) and should slide in with a little force
- Optional: small cap can be pushed/screwed at the rod so that the lower part is closed
- Before connecting lower and upper part you can sand the top a bit to allow smoother assembly
- Mount the part on top of the printer
- Slide in the Pad
- Connect the wires
- Done (hopefully)
In case you would like a more robust/nicer version I might be working on one.