Hyperkin Trooper Extended Handle and Bat-handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A longer stick for the Hyperkin Trooper style joysticks with optional Bat-Handle grip.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
This is a screw-in replacement for the original Hyperkin Trooper joystick handle. It is about 1cm taller than the original and slightly more narrow.
The stick handle is designed to be easily printed upside-down. I recommend using a plastic with strong layer adhesion, or printing at a higher temperature.
The stick grip/bat-handle adds another 1cm of height and should slip over the modded handle. It will not fit over the original handle. This was designed to be printed in 95A or similar flex filament and as such it is a very tight fit, other filaments may not work or the model may need scaled slightly in the slicer.