Golf Bag Sand Bucket Hook
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.17 – €0.21 net (excluding VAT)
For file: golf-bag-sand-bucket-hook_0.4n_0.3mm_PETG_MK4_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 12.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A hook used to hang a small bucket of sand from your golf trolley
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Hey friends,
A quick model to help repair a friends' golf cart, which is used to carry a set of clubs and a small sand bucket to fill in divots. Over the years the original sand hook snapped off, and this was a simple repair to get a few more years of life out of the trolley :-)
The design is fairly straight forward and printed in PETG with a higher number of perimeters to add a bit more strength. I tested the hook to roughly 6kg before a small hairline crack was observed, but didn't managed to snap it, so it should be plenty strong to hold a small bucket of sand.
As part of the print I used a ‘helper disk’ to keep the part secure on the print bed and it can be trimmed off with a pair of flush cutters after printing.
Hope somebody out there finds this useful.
Cheers