Sidemount Drybox Stand for Prusa XL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mounts to your 30x30 extrusion and creates a stand for a drybox
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 0
- Views
- 510
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The XL does not like filament unless it is super dry. Leaving the spools exposed on the side while you print is not a good way to get successful prints, so I made this attachment for Dry Boxes. Print with the magnet side down. Use Snug supports and the supports pop right out. I glued a little strip of metal onto the bottom of the drybox but you can also stick some magnets on the inside of the drybox. Whatever drybox you choose. I used these which are the smallest size I could find that fit 1KG spools.
Insert the M4NeS Nuts into the horizontal extrusion. Then use the 2 M4 Bolts to attach the platform right to the horizontal extrusion. Happy Printing!
https://www.amazon.com/gp/product/B0CFLJCJSF/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1Print this with the magnet side down. Use snug supports. The supports pop right out of the magnet holes.
hardware needed:
5x 10x3mm Magnets
2x M4x 12-20mm bolts
2x m4NeS drop in nuts https://www.printables.com/model/891014-spring-loaded-drop-in-m4-t-nut-m4nes or any other drop in M4 nut for 30x30 extrusion
Edit 8.2.24:
I printed in PLA and the mounts sagged over time. I reinforced the platform by adding some gussets underneath. I would recommend printing in PETG to reduce sag.