Filament Quick Clamp for 2KG Spool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.93 – €1.14 net (excluding VAT)
For file: filamentclamp-2KG_SPOOL-clip_0.4n_0.2mm_PLA_MK4IS_44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.03 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 44.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Filament Quick Clamp for 2KG Spools that I remixed from "ishikawats", he created extra small, small, medium, large, XL
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I scaled “ishikawats” XL Filament Quick Clamp with clip so that it can be used with 2KG spool's. “ishikawats” has XS, M, L, and XL available
Description from “ishikawats” design, I used the same:
- Mechanism is fully print-in-place.
- Add rubber band for the spring loading. I reused some that came with a bunch of asparagus.
- There is a version with filament clip and a classic one without clip. I recommend the version with filament clip.
- If you go clip-less, insert filament between rubber band and clamp for extra security. This is if your filament want to escape under the clamp.
- STLs with different sizes available:
- XS: 39 - 52 mm
- S: 51 - 64 mm
- M: 55 - 68 mm (this size works fine on my Prusament and eSUN 1 kg spools)
- L: 64 - 77 mm
- XL: 73 - 86 mm
- 2KG model 109-129mm (the 150% scaled model)
Printing tips:
- Don't use brim as it might fuse the first layer.
- Don't use supports, the model relies on bridging and safe overhangs.
- Use at least 3 perimeters so that the bridging has something to attach to.
- Give it a squeeze to free mechanism in case it is stuck after printing. It should release with a click, pull it back and forth a few times and it should move freely.
- PLA can be slippery. Apply some duct tape to the clamp ends if more friction is needed.