1 / 5
RatRig V-Core 3.0 Cable Chain Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable chain mount for RatRig V-Core 3.0 with EVA 2 carriage
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 0
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Designed for these cable chains: https://www.aliexpress.com/item/1005001795469984.html, 15x20mm, R28. Be sure to buy enough length depending on your printer size. I use 25 segments on my V-Core 3.0 400mm.
EVA part replaces cable_holder.stl and unversal_cable_mount.stl.
V-Core part replaces cable_tie.stl.
Four M4 nuts and M4x12mm countersunk screws are used to attach cable chain.
This is the first iteration, but I'm pretty happy with it, so I'm not planning to do any further modifications. However, if you need some - please tell me in the comments.