1 / 2
Simple One Handed Hangboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple one handed hangboard with depths of 30, 25, 20, 15, and 10 mm
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 68
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Share Alike
Printing:
- The hangboard can be printed without support.
- I recommend printing in fuzzy skin mode for the surface to have a good grip.
Mounting:
- The hangboard has four 5mm diameter screw holes, they are spaced apart 60mm horizonatall, and 90 mm vertically.
- I replaced an area of dry wall with 5/8 inches plywood, then I screw the hangboards directly into the plywood. I weight 80 kg / 176 lbs, and so far the hangboards supports my weight soundly.
Disclaimer:
- Depending on the material of your filament, the structural stability of the wall, your body weight and other variables, thie hangboard might fail. Use your best judgement and be careful.