1 / 2
Open-frame Power Supply Case, IEC 320-C14 to Powerpole
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Open-frame power supply case w/IEC 320-C14 AC input and 2P Anderson Powerpole outlet connectors
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A simple end-case for open-frame power supplies with integrated Anderson Powerpole connector holder. Includes standoff feet model.
As open-frame power supplies vary in height of the side heatsink hole and I've used this for case attachment, multiple models are included with varied z-heights from power supplies I use. If you require a different z-height, message me for it to be added. (See photos for hole reference)
Prints
1x ConnCover <Z-height> (select per side screw center height vs outer bottom face)
2x Standoffs
Hardware
- 1x Switching Power Supply
120W https://www.amazon.com/gp/product/B01E6RMASC (Z31.5mm)
180W https://www.amazon.com/gp/product/B0CZ4KMJ4C (Z29.0mm) - Wiring to attach AC & DC connectors to terminals
- 1x 2-wire Anderson 15/30A Powerpole Connector
- 1x IEC 320-C14 Panel Mount Socket
(e.g. https://www.amazon.com/dp/B07PVP7GL2) - 1x M2x20 Button-head Screw w/washer & nut (for Powerpole)
- 4x M3x6 Button-head Screws (2x feet & 2x cover attachment)
- 1x M3x4 Heat-set Insert (cover side attachment)