1 / 1
Temperature sensor holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.73 – €0.90 net (excluding VAT)
For file: temperature sensor holder_0.4n_0.2mm_PETG_MK4IS_49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 48.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wall mount for temperature and humidity sensor module AM2301A or compatible.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 34
- Makes
- 1
- Views
- 289
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Manufacturing instructions:
- Material: PETG
- 3D Printer: FDM 3D printer, average print time 1h (input shaper enabled on MK4).
- Slicer settings: 0.2mm layer height, 3 perimeters, no supports
- Post processing instructions: None
- Assembly instructions: Use 2 bolts or screws to attach to the wall.