1 / 4
Simple Lamp Shade for IKEA RÅSEGEL Table lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in clear PETG in vase mode, makes a good shade for an economical lamp base. Use only with cool bulbs (like LED)
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 39
- Makes
- 0
- Views
- 915
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This model is a slip-on lamp shade for the (super cheap) IKEA RÅSEGEL table lamp base.
It should be printed in vase mode, I printed it in clear PETG.
Do not use any bulb that gets very warm. Use low-wattage LED bulbs only, for example. Heat has nowhere to go – especially if the cap is used – so don't use any bulb that gets warm.
Printing tips:
- Print the shade in vase mode with a brim and no bottom layers for the shade. (These settings are present already in the .3mf file)
- The (optional) cap is also printed in vase mode, but with two solid bottom layers. Again, these settings are in the .3mf file)
- Don't be afraid to slow down the print speed on the printer for better layer adhesion if needed.