1 / 3
Vacuum Hose Adapter - Craftsman 2.5 to 1.5 — image 1
1 / 3

Vacuum Hose Adapter - Craftsman 2.5 to 1.5

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adapter allows 1.5 inch "shop vac" accessories to be used with the 2.5 inch OD / 2.25 inch ID Craftsman sized hose.

Rating
5 / 5
Likes
22
Downloads
246
Makes
0
Views
869
Reviews
1

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution

I designed this adapter specifically to connect my Craftsman wet / dry vacuum to the Cyclone Dust Separator uploaded by Thomllama.  

Since I wanted the same part to be used on both the inlet and the outlet, I designed the small end to go inside the nominal 1.5" holes on the dust separator.  I did taper it slightly as well to allow the adapter to find its own best fit.  The large end has no taper, as I noticed that the end of my Craftsman hose already has one, so it should self-locate as well.

Plastic shrinks, and different brands / materials shrink by different amounts.  Because of this, I've also provided my parameterized model so that you can modify the fit as needed.  

Hope this helps someone!

 

Tags