Vacuum Hose Adapter - Craftsman 2.5 to 1.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows 1.5 inch "shop vac" accessories to be used with the 2.5 inch OD / 2.25 inch ID Craftsman sized hose.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 246
- Wydruki
- 0
- Wyświetlenia
- 869
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
I designed this adapter specifically to connect my Craftsman wet / dry vacuum to the Cyclone Dust Separator uploaded by Thomllama.
Since I wanted the same part to be used on both the inlet and the outlet, I designed the small end to go inside the nominal 1.5" holes on the dust separator. I did taper it slightly as well to allow the adapter to find its own best fit. The large end has no taper, as I noticed that the end of my Craftsman hose already has one, so it should self-locate as well.
Plastic shrinks, and different brands / materials shrink by different amounts. Because of this, I've also provided my parameterized model so that you can modify the fit as needed.
Hope this helps someone!