Magnetic Hydrometer Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.43 – €0.52 net (excluding VAT)
For file: Hydrometer V01_0.4n_0.2mm_PLA_MK4IS_25m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.47 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 25.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnetic mount for the well-known Chinese hygrometer with thermometer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
You have to know the cheap round Chinese hygrometer with thermometer. You can find a lot of similar mounts, but none suited me.
The mount is bi-directional, just turn it and insert the hydrometer.
My design is based on a public model located in the OnShape library. You can find the link below of course.
I used a 10x10x2 mm neodymium magnet for sufficient attachment.
Print instructions:
- Material: PLA
- Layer: 0,2 mm
- Perimeters: 2
- Infill: 15%
- Supports: No
- Brim: Optionaly
This model does not require any special settings, more details in the attached 3MF file.
Part list:
- Printed part
- neodymium magnet 10x10x2 mm (or 10x5x2 mm [x2])
Assembly instructions:
The magnet is glued to the body of the holder with epoxy glue.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.
Print visions, create reality!