Killswitch Anker PowerCore+ 26800 Killswitch + Kickstand compatible v3.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows for attaching the Anker PowerCore+ 26800 on the back of a Killswitch Case and adds another Killswitch slot
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This model can be printed to hopefully allow for attaching an Anker PowerCore+ 26800 to the Killswitch Case while maintaining compatibility for the kickstand or other accessories. I have not printed this yet.
Huge thanks to https://www.printables.com/model/31116/files for the battery casing and https://www.printables.com/model/411297-project-killswitch-universal-mount for the mounting system/case.
This is my first ever upload to a 3D printing website. Please give me some criticism since I'm pretty bad at using Fusion 360.
v2: Flipped the attachment point for attaching the kickstand so the opening of the battery holder is on the left, closer to the charge point of the Steam Deck
v3: Added hole on the bottom for easy removal, cutout on the side to allow for easier destruction if the battery gets stuck and easy insertion/removal, and a window on the front to see the battery level. Removed v1 and v2 for safety v3.1: Just combined meshes to make sure it'll actually print
Printing instructions:
USE SUPPORTS ATTACHED TO BED, good luck with the print.
Build should be just slipping the battery into this case, then attaching it to a Killswitch Case, then optionally adding the kickstand or other accessories on top. Since I just ripped the complete assembly of the universal adapter, you can also attach a velcro strap or other fastening hardware to this case as well.