Peristaltic pump (strong)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I present my peristaltic pump for watering flowers on the balcony based on the engine from the Ford Scorpio ABS pump and
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 74
- Makes
- 0
- Views
- 950
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I present my peristaltic pump for watering flowers on the balcony based on the engine from the Ford Scorpio ABS pump and a hose 8 mm (inner diameter) / 10 mm (outer diameter).
I printed the pump from PLA because its elements do not come into contact with the pumped medium. The pump should use a soft silicone hose with an outer diameter of 10 mm and an inner diameter of 10 mm. The bearings used in the pump are 625-2Z (5x16x5). I used a 12V electric motor from a Ford Scorpio ABS pump as a drive. However, if you change the rotor and/or flange, you can adapt the pump to any engine/drive - for this purpose, I am attaching a Fusion360 file (I am not a professional designer, so please do not laugh at how I drew it - I am learning).
Here you can see how this pump is working: