1 / 2
X and Y-End-Idler for Smooth Axles - MK3(S+)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
X and Y-end-idler replacements for MK3(S+) for using smooth axles
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 59
- Makes
- 0
- Views
- 981
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The threaded bolts as axes for the X and Y idlers are, in my opinion, Prusa's biggest design flaw. It shortens their lifespan too much.
Here is an alternative for smooth axles. I used 3mm spring steel rods and shorted them with a Dremel. I also replaced the original idlers with double bearing 20T-idlers and filled them with some grease between the bearings.
Axle lengthes:
Y-ender - 23mm
X-ender - 18mm
(Parts are remixes of the original R4-Y-ender and the R6-X-ender)