Right Angle Magnetic Mount Bracket for 6mm x 3mm Neodymium Button Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets for 6mm x 3mm Neodymium Button Magnets, epoxy to affix magnets, both glue/tape-on versions included.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Magnetic mounting brackets for inexpensive 6mm by 3mm neodymium button magnets.
Designed to allow small ferrous metal items to be held hanging down from bracket while bracket is mounted to vertical surface.
After printing, use epoxy to affix magnets to bracket. Screw-on brackets have holes for M3.5 flat head screws with countersink. Glue-on brackets can be mounted using double sided tape or adhesive.
These print without support if you orient with the screw/tape/glue side down as seen in the Prusa Slicer screen shot image.