Prusa XL Tool Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 color tool rack for the Prusa XL. Holds all the standard tools plus the extras you always use.
- Rating
- 4.889 / 5
- Likes
- 158
- Downloads
- 649
- Makes
- 19
- Views
- 3,421
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Supplies:
1 M3x12rT (Torq screw)
1 M3nEs (Nut)
2 8x3mm Magnets
Instructions:
Sliced for a 2 tool XL. T1 = Body (gray) T2 = Stripe (orange)
There is a M600 color change on Tool #1 just before it closes off the magnet hole. Don't actually change the filament color. Insert two 8x3mm magnets (stacked) in the magnet pocket on the front corner. Then put the same filament back in the loader and resume. This is to hold your exacto knife on the front edge without seeing the magnet.
Details:
This tool holder is for the side of your printer. Standard is for the left side, but you can mirror it (X) if you want to mount it on the right side. It bolts to the side of your Prusa XL with the leftover hardware from the side panels.
This is to hold all the tools that came with your Original Prusa XL plus a couple extras like flush cutters, box cutters, and a scraper. All the tools are slotted in at an angle so nothing rattles around when the printer is rocking. If you do hear a driver rattle just wad a small piece of paper towel or something, and that will fix it. There's a space for flush cutters and a hook for a scraper. The scraper shown in the pictures is my design, specifically for the 2 tool XL.