Universal Slim Disc case holder for PS/Xbox/PC games
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.64 – €0.78 net (excluding VAT)
For file: DVD_holder_L_v1_0.2mm_PLA_MK3S_45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 45 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Under the table holder for any kind of disc
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
material: prusament PLA galaxy black ←link (of course could be printed in PETG or any other not flexible material)
printer: Prusa i3 MK3S+
layer height: 0,15mm
infill: -there is none-
no brim, no supports
EN:
Pieces are obviously apart so you can place however apart you want.
For attachment i used some good double sided tape, in slicer you could easily add holes for nails/screws
I designed this compact holder under my TV table, because after I inserted a disc into PS3 wondered where to put the empty disc case. Too lazy to stand back up to put it back on the shelf. Yeah sure I could put it on the table, but it could be there anywhere from an hour up to months or years (depending how good the game is). So this simple fast printed solution is probably the best I could come up with.
CS:
Kusy jsou oddelené takže je můžete dát jak daleko od sebe jen potřebujete.
K přidělání pod jsem použil kousek dobré oboustranné lepící pásky, v sliceru můžete jednoduše dodělat díry pro hřebíky/šrouby
Navrhl jsem tenhle kompaktní držák určený pod stůl, protože mi zůstala prázdná krabička potom co jsem vložil disk do PS3. Jsem moc líny na to abych si stoupl a vrátil ji zpátky na polici. Ano mohl jsem ji samozřejmě nechat ležet na tom stole s televizí, ale tam by mohla ležet od hodiny až po měsíce nebo roky (v závislosti na tom jak dobrá ta hra je). Takže toto rychle tištěné řešení je pravděpodobně to nejlepší s čím jsem mohl přijít.