Counting matching models…
Basic / Minimalist PS1 PS2 Controller stand I designed. Couldnt find one that i could print and liked using my Ender 2 Pro ( small Bed ) just print all 3 PCS, no supports needed at all ( just orient them right ) and snap together. i had…
My first upload! I've been learning a lot and wanted to try making a thing. None of the Playstation One game holders I found seemed to work well for jewel cases so I used the one from 3DJK (and most other game holders) for inspiration.…
Wall mountable PS1 Classic Edition controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) Check out all my other video game…
Filaments used: Esun yellow Elagoo black Elagoo matte green Elagoo matte red Elagoo matte blue Printed with .2mm layer height and starting layer of .16
The model has not been tested and may need further adjustments for the face plate.
Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.
This is a very quick remix !! Topology isnt ideal, please DM me if theres any problem
This is remix of the original. Everything about it and instructions can be found here: https://www.printables.com/model/256464-densha-de-go-plug-play-brake-throttle-upgrade I had to remodel the parts to make them more of a snug fit for my…
This is a replacement clip to close the lid of the PlayStation 1. It often happens that the original clip can break over time, this model I created replaces it, restoring the correct closure of the lid.
This is a small mount for the USB C PD trigger board that appears in the reference photo, it must be configured to output 12v DC in order to work with a PS1PSU (like the one I'm using) or equivalents that are designed to work with that…
Sinden lightgun users know how difficult it is to get everything together to setup for PS1 and PS2. Dunne.karl has taken upon himself to simplify the process. With creating the Arduino PCB for hookup, I decided to create the custom shell…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
READ BEFORE PRINT!:) If you want the textured side pointing outwards from the wall right click the model and Mirror it! I have a 0.2mm nozzle (PETG) so I didn't mirror it, made it on draft looks great! Let your print cool down when its…
All around enclosure for the Geekworm X-UPS1, a UPS for Raspberry Pi/other 5/12V based devices (like the Zimaboard). For anyone who's not so happy with the top/bottom only acrylic covers included with the device.
PS1 Styled piece to fit on the end of the USB C - C cables included with PS5 slim Is tight enough to clamp with the cable but if you move your cables a lot I suggest using some adhesive between the parts.
Designed this piece after seeing the PS5 30th anniversary announcements. Fits on the USB A end of the cable included with Dualsense controllers. Printed up right for the best quality on the Sony logo. 0.2 Layer height, 0.4 layer width,…
first attempt of making a 3d model , couldent find a holder for my ps1 fishing controller so had to make one
The model has not been tested and may need further adjustments for the face plate.
A replacement cover for a BigBen wireless adapter compatible with the PS1. The original plastic cover is too tall and it prevent inserting a memory card while playing. Some PS1 games does not read memory card on slot 2, so you have to…
I wanted a holder that can be attached to the windshield with the GPS facing out with minimal obstruction. It's compatible with the go pro mount and you can put it in different orientations. Add some felt on the 3 “legs” to reduce the…
To use with the PS1PSU board from aliexpress and an USB-C PD connector (aliexpress). Prints with supports. I used matte grey PLA. USB-C PD : https://fr.aliexpress.com/item/1005006191468955.html PS1PSU :…
These brackets were designed to mount a Classic Playstation to the wall and use it.
And don't forget : “Don't put a GPS on a KD please. But still it's there for some reason.” :-)
A side panel adapted to fit the 3d printer gmaker-fps1 mini heater. You can simply slot the heater into place and run the cable through the panel hole to the heater. Optionally add double sided Velcro to the back of the heater and into…
I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…
For all the nostalgic people (like me), I created a copy of the GranTurismo Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
For all the nostalgic people (like me), I created a copy of the Colin McRae Rally Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
For all the nostalgic people (like me), I created a copy of the Crash Bandicoot Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
The data set includes: One CD-Clip for Playstation one games Different Templates for the mounting plate are also included. One design for 3x7 CD's and 2 times 3x3 CD's are included. Both templates are designed for a panel size of 1200 x…
I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…
For all the nostalgic people (like me), I created a copy of the GranTurismo 2 Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
For all the nostalgic people (like me), I created a copy of the (gioco) Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
PS1 style USB cover based on Jeff Chen's original design, modified to fit Goodmans USB-C 2M cable in grey.
Remix of littlebalup's xStation cover for SCPH-5XXX PlayStations. Extender free design! Shoutout to littlebalup for the original design
Printed on PETG, 0.4mm nozzle, 0.2mm layer height, nothing fancy Used stripped 22awg wire for the pins, enameled wire for connecting to the board RP 2040 Zero should snap fit in the slot SCAD file attached too, I don't know what I am…
3D printed spacer to be used with the Robot_Retro PS1 power supply. robot_retro store Designed by Joseph Tomkins
THE ORIGINAL FILAMENT GUIDE IS REQUIRED TO HOLD THIS IN PLACE!! A quick model I put together since I was starting to get annoyed with the extra tubes coming out of my S4 just lying around and getting tangled together. There's a version…
A replacement leg for the mCover case for a Dell XPS 13 9370. https://www.amazon.de/gp/product/B079TZWQKK/
Modelo 3D listo para impresión 3D Este diseño altamente detallado de está optimizado para impresoras 3D FDM, SLA y más. Ideal para coleccionistas, entusiastas del modelado, y creadores que buscan piezas únicas. 🔹 Características clave: *…
This is a mount to put your Garmin GPS12 in. The display and all the buttons are visible and usable. You might have to remove the lanyard for it to fit.
This is a 10" rack mount for Reolink's 8-port PoE switch (RLA-PS1). I couldn't find one at the time, so with inspiration from some rack mounts for TP-Link switches I've used in the past, I reworked an existing model to fit this switch. Be…
The purpose of this template is to provide approximate dimensions for making add ons, boxes, cases and the like.
печать с поддержкой наполнения и высоким слоем по желанию модель не разработана сильно, поэтому думаю не продумаю труд, возможно, лямки рюкзака тонковаты, может позже я их переделаю или совсем повешу при помощи магнита
I wanted a way to give a bit more stability for my PS1 games since I show them off from the front without any support. Saw the original model by waffelo here but found out it was only for single sized jewel cases. Inspired by their design…
Print flat, or vertically if the spring doesn't work well flat. First STL is for OEM PSIO, second is for aliexpress clones.
Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.
This is a very quick remix !! Topology isnt ideal, please DM me if theres any problem
i had a laser housing and an empty ps1 namco gun shell so i made a laser gun Instructions it uses 11mm laser housings, just the silver one people usually use i included the sketchup file if you want to edit it you can turn a namco gun…
A simple RAMPS1.4 holder for mounting the electronics below a Kossel Mini printbed. Suitable for Kossels with 15x15 extrusions. Note: The bed has to be raised slightly by about 10mm, to have enough clearance for the large thermal fuses.…
How to print: Print with the USBC plug pointing up. |This will allow more precision and require no supports.
This is remix of the original. Everything about it and instructions can be found here: https://www.printables.com/model/256464-densha-de-go-plug-play-brake-throttle-upgrade I had to remodel the parts to make them more of a snug fit for my…
This is a replacement clip to close the lid of the PlayStation 1. It often happens that the original clip can break over time, this model I created replaces it, restoring the correct closure of the lid.
I printed it in ABS for better durability, with supports
To make this adapter you'll need: x4 M3 nuts x4 M3x14mm screws x1 Controller cable for PS1/PS2 (I used one from a generic controller) x1 Esp32 of the following form factor (see picture below) I recommend testing it after flashing it…
Hello, Today I have a Playstation PS1, PS2 controller holder for you The controller fits beautifully into the stand. They will beautify any video game collection. It is for a special type of controller for PS1, PS2 Classic controllers…
I improved the model created by Mattia. The disc now actually stays in the case and don't come loose. Also Added support for games with 2-disc like Gran Turismo 2 and Metal Gear Solid. My tips for printing the case: -Use a 0.6mm nozzle…
This is a small mount for the USB C PD trigger board that appears in the reference photo, it must be configured to output 12v DC in order to work with a PS1PSU (like the one I'm using) or equivalents that are designed to work with that…
fairly basic memory card holder developed in tinkercad, prints well, needs to have the logos glued in. can have the Ps1 logo print in multicolor (see attached picture). please comment with questions or concerns.
Sinden lightgun users know how difficult it is to get everything together to setup for PS1 and PS2. Dunne.karl has taken upon himself to simplify the process. With creating the Arduino PCB for hookup, I decided to create the custom shell…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
Simple in-slicer-created remix which fits ps3 gamepad with charging cable Fits ps1 and ps2 gamepads (last photo)
Requires 4 - m2.2x7mm Wellocks screws (not machine screws. These screws are similar to the PC fan mount screws but in m2.2 size. Wellocks are available on Amazon and Ali.) Link to project: Sinden PS1 Adapter v2 Rev 1.1 - OSHWLab
READ BEFORE PRINT!:) If you want the textured side pointing outwards from the wall right click the model and Mirror it! I have a 0.2mm nozzle (PETG) so I didn't mirror it, made it on draft looks great! Let your print cool down when its…
All around enclosure for the Geekworm X-UPS1, a UPS for Raspberry Pi/other 5/12V based devices (like the Zimaboard). For anyone who's not so happy with the top/bottom only acrylic covers included with the device.
PS1 Styled piece to fit on the end of the USB C - C cables included with PS5 slim Is tight enough to clamp with the cable but if you move your cables a lot I suggest using some adhesive between the parts.
English What is a Pixel Score Card (PSC)? 🎮🕹 The PSC project is created for makers who grew up with a controller in their hands and now want to collect their favorite gaming memories in physical format. Each card is a 3D-printable tribute…
English What is a Pixel Score Card (PSC)? 🎮🕹 The PSC project is created for makers who grew up with a controller in their hands and now want to collect their favorite gaming memories in physical format. Each card is a 3D-printable tribute…
This is a custom replacement case for the RK61, designed with a PS1-inspired aesthetic. The goal was pretty simple: take the stock RK61 PCB and give it a completely new shell that feels more like a retro console accessory rather than a…
PS1 - Picostation SD-Card Adapter für den Laserausschnitt
Organizer for a collection of Biohazard game discs for PlayStation 1 Category: DIY
Show off your PS1 collection instead of hiding it in a drawer! This stand holds up to five original PS1 jewel cases in a stepped, cascading layout -- each cover tilted toward you and visible. The soft, rounded "pill" design gives it a…
A bracket I whipped up to suit a GW-CRPS1200 being used in the awesome NexGen3D DIY Steam Machine REDUX case. This PSU is sold on AliExpress and marketed for use with the BC-250.
This is a display stand for any media in Switch game cases, DS and 3DS game cases, DVD cases (PS2, GameCube, Xbox, Xbox 360, movies, etc.), CD jewel cases (single CD PS1, Dreamcast, Turbografx 16/PC Engine, etc.), Bluray cases (PS3, Xbox…
A game display for games in double jewel cases (PS1), long jewel boxes (Sega Saturn), long boxes (PS1, 3DO) and boxes (Game Boy, GBA, NES, Atari, Intellivision, Genesis - NOT clamshell cases). This does not hold SNES or Nintendo 64 boxes.…
Mahr PS10 roughness gauge adapter for dial gauge stand. Print form PETG 0.2 layer height The model has included the support material, you need to cut it a good, thin knife. Needed extra parts: -M5 hexhead scew (min. 6-8mm long) -8mm…
Lithophane / Vitrail dédié à la jaquette de Tomb Raider 2 sur PS1 Playstation! Faites vous plaisir ! This is a lithophane from the cover of Tomb Raider 2 on PS1 Playstation, that could be used as a stained glass window. Enjoy ! Print…
Lithophane / Vitrail dédié à la jaquette de Crash Bandicoot sur Playstation ! Faites vous plaisir ! This is a lithophane from the cover of Crash Bandicoot on Playstation, that could be used as a stained glass window. Enjoy ! Print…
Simple stand to hold the 8 sanding arbors of Proxxon PS13 pensander
I needed this to get the power button to work on a 3rd party PS1 shell. Worked out great,
RUPS1 (Robot for Upcycling Prusament Spools) je programovatelný robot pro základy elektroniky a programování. Print instructions Robot je tisknutelný na tiskárně Prusa i3 MK3S z materiálu PETG. Návod na sestavení můžete stáhnout zde:…
Text is printed separated and inserted in, made for a cleaner product. Recommended printing in a PLA Silk for the best results. Text is printed upside down (only if you have a smooth print surface). Print files are customized temperature…
If you don't have or just don't want to use a Dremel, this jig is perfect to make a clean and precise cut. Add some flat sanding and you will be good to go in minutes!
This jig includes a base and slide on cover to hold standard male/male jumper wires in place to make it easier to connect a playstation memory card to your arduino (or other microcontroller) with Memcarduino and MemcardRex to transfer…
RetroPie Emustation box for Raspberry Pi Zero Made with 6 M2x4-5 screws, you have to glue connectors to top piece, designed to remove the cover of the camera pin port, otherwise, it won't fit... You can add/glue a green LED and…
I am thrilled to present the "PS1 Memory Card Hard Case," a 3D printable STL model that I have created to protect your precious PlayStation 1 memory cards. This model is available completely free of charge, allowing you to conveniently…
Wall mountable Playstation (PSX PS1) controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) There is a model for both the joystick…
I made these brackets to fix a Cyberpower CPS1500AVR battery backup device I purchased used. The L bracket / hooks that hold the front faceplate on were broken. Since straight gluing them would not be strong enough I created these small…
This is a remix of the lid for the Ramps 1.4 enclosure found here. https://www.thingiverse.com/thing:677892 The Kossel wording was removed and replaced with Prusa i3 Clone. Added v2 of the lid that has recessed lettering to improve…
Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…
Different tools for the Proxxon PS13, best printed in resin, not sure about FDM. I use 3M 2-5-468MP doublesided tape to stick regular dry and wet sandpaper on the tools. For the round one I use round die punches and for the triangle I use…
Bracket for installing a 6015 fan on ramps It must be screwed
