1 / 5
Mini TV using OLED Screen and ESP32S3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom model to house a PCB with a XIAO Seeed Studio ESP32-S3 and SSD1331 OLED display.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 36
- Makes
- 0
- Views
- 940
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
This model was made for a custom PCB and housing for a small TV I built using CircuitPython, an SSD1331, and a Seeed Studio ESP32-S3.
It was my first model in Solidworks - so it's very simple 😅
Meant to be used with a flat USB-C Connector on the bottom.
Print TV on side with legs supported - exclude supports from USB-C hole if desired
Print Lid Flat with extruded portion facing up.
Printed on a Prusa MK4