Autool X60 Mini Cooper R56 - *Angled* (hi-res)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini Cooper R56 left angled pod holder for Autool X60. Does not require any modification of the Autool, just slips in.
- Rating
- 1 / 5
- Likes
- 11
- Downloads
- 144
- Makes
- 0
- Views
- 1,523
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Recommend printing in PETG or ASA/ABS for sun/heat tolerance inside the car during hot summer days.
There are 2 versions here:
angled_flattened: This requires a few extra steps, but it gives a cleaner and stronger final result.
Print the angle guide and the gauge mount as normal, then assemble the two and use a heat gun on low, gently bend the arm to fit the guide, and hold it in place until cooled. Remove the guide and you're ready to go.
If you don't have a heat gun (depending on the material used), a hair dryer on high might work.angled: If you don't have a heat gun or just don't want to mess with the extra steps, this one is ready to go, just print it out and install, but the angles will require supports and the print likely won't be as nice.
It is secured to the screws behind the dashboard.