Counting matching models…
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
(DE) Ich habe das Scharnier eigens für meinen selbstgebauten 3D-Drucker Wärmeschutz mit 5mm Plexiglas-Fronttüre (420 x 340mm ca. 1Kg Gewicht) konstruiert. Man kann es in PLA oder auch in PETG drucken. Ich habe die Scharniere in PLA…
Pinted with PLA+ at 0,20. 2 walls and only 5% infill makes it strong enough.
Honeycomb Grilles These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van. They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in…
Sturdy wall mount for a DUX60 Makita trimmer. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
Tried to create something that can be used outdoor. Honeycomb structure is intended to stop raindrops and additional grid should prevent insects from entering throuch holes or nesting in honeycomb. Internal 3x3 net is separated from…
Strong hinge 60x60mm open @ 180 degrés Print in place PETG or PLA, buse 0.6mm, layers 0.3mm
7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…
Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).
Strong hinge 60x60mm Print in place PETG or PLA, buse 0.6mm, layers 0.3mm 180 degree opening version
New 30x60 base for Old World
Our fire service has recently been issued with Motorola APX6000 portable radios. Unfortunately they weren't supplied with any sort of mount to secure them in our fire trucks. This design consists of a cavity shaped to accept the radio and…
Created this quick model for better flow calibration. I have found that when printing larger models after calibrating flow with a 20x20 cube, I usually end up with some form of under extrusion somewhere in the model I'm printing. To solve…
Print two brackets, mount them ~14cm apart on the wall. Optionally, if the power cord is not long enough to reach without lifting the power brick, there's a power brick holster which can eliminate the tension on the power cord. See the…
This is a replica of the stock Crestron 60 series TSW touch panels. Prints with no supports or external hardware. I had a few touch panels that were missing the bracket. Printed in PETG using .2mm speed profile in PrusaSlicer.
Air multiplier design is definitely not stolen from a major British technology company (ta very much Jimbo) Uses long M5 bolts (4x) and matching heat inserts
Because the quarentine I don't find anywhere xt60 plugs if i order the shipping is super expensive... And I have some banana plugs lying around... And looking is the same exact size of the normal xt60 plug and f**k I just print heheh…
Collection of screws (ISO 10642 / DIN 7991) including : M6x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is…
This is a mainboard cover for the Sovol SV06 with an 60x60x15 fan and built-in DC-DC converter mount in mind. The screw to adjust the voltage is exposed so you can adjust the voltage later on to reduce the fan speed. The honeycomb…
Depending on what you want to build this plastic one might replace metal original. Sides: 60mm x 60m x 60mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you like this little thing, you might also want to check these…
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
Holder for solar panel size 110x60mm from Aliexpress. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Resolution: 0.4 Infill: 20% Filament: Gembird PLA White, black
Nests in drawer indentations and has a chamfered base to easily grab small parts from the bottom. I
Fan 60x60x15 Stl+step format Category: 3D Printer Parts
Collection of screws (ISO 4762 / DIN 912) including : M10x 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
This is a remix of andrenauta's original From the original: Does not require any modification of the Autool, just slips in. It is secured to the bolts behind the dashboard. Print at 1:10 scale!!!
If you have a Bambu Labs printer or use Makerworld \ Bambu Handy, see : https://makerworld.com/en/models/183673#profileId-202535 Harbor freight version was too small for the brand I have so I recreated for a 125x60mm box. Printed flat and…
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
An adapter to use a Noctua 60mm fan on a CPU cooler that only accepts 50mm fans. Specifically designed for home lab server from Supermicro - SYS-5028D-TN4T. Should fit almost any cooler for the FCBGA 1667 socket (Intel® Xeon® processor…
Collection of set screws (ISO 4028 / DIN 916) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Presenting a practical 3D printer filament swatch. The swatch is 60x60x4mm dimensions. Swatch is designed to print with .2mm layer height. The swatch includes a sample of text, small dome, pyramid, box and cylinder. Also includes…
Update: Added Wooting 60HE compatible plates This keyboard is purposefully designed to be 3d printed with a 2-3-2 design so that it is printable on standard size 3d printers and creates a solid assembly with only screws and no glue.…
Einfache Abdeckung für einen Baummarkt Kabelkanal mit 112mm x 61mm oder 110x60mm
0.1mm layer height. infill 20%. outside diameter 56mm, inside diameter 30mm, diameter for axle 2mm.
Printed with PLA,PETG, ABS, ASA, ASA275 at 0.3 or 0.2mm layer height, 30% infill with supports.
A small enclosure for a Wemos D1 Mini mounted on a 40 mm x 60 mm perf board. There are two screw holes to secure the board and a cabling egress on one side for screw terminals. I created the design in Fusion 360 and have included the file…
Shelf bracket in size 60x60x30 Print on the side for better stability. --------------- Regalhalterung in der Größe30x30x30 Auf der Seite drucken für bessere Stabilität. Hit Like, rate and comment!
Die komplette Besteckeinlage ergibt sich aus je 2 großen und 2 kleinen Einzelteilen . Der Verbinder ist optional. Achtung: Die Einzelteile sind recht groß, prüft daher den max. Druckbereich eures Druckbetts***. Her die Maße der einzelnen…
Depending on what you want to build this plastic one might replace metal original. Sides: 60mm x 60m x 60mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
A1/A1 mini poop tray
What it's for A drop-in replacement for original PS2 fan. It adapts Sunon HA60151V4-1000U-A99 fan to fit inside old fan slot. Does it need to be Sunon? No. The little tabs holding the fan in place are tailored to Sunon, but there's a…
Hey my 3D-Friends! I have designed a easy wall mount for this ASUS-Router: RT-AX89X (AX6000) IMPORTANT: Here you find only the Wall Mount Screw Template. The Wall Mount Plate do you find here:…
Recommend printing in PETG or ASA/ABS for sun/heat tolerance inside the car during hot summer days. There are 2 versions here: angled_flattened : This requires a few extra steps, but it gives a cleaner and stronger final result. Print the…
My remix allows you to mount the display without interfering with the printer's structure. The display bottom cover has channels for cable clips. Same with 2 chamber plates. Additionally, there is an 8mm hole for passing the webcam cable…
DE : Seifenschale / Seifenbox / Schale für Seife Ideal für Seifengröße von 60x60 mm (z. B. von SANTE mit 60x60x20 mm) Maße der Schale: Außen: 80x80 mm Innen: 76x76 mm (Wandstärke: 2 mm) Hinweise zum Druck: Ich habe PETG verwendet, da die…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 6pcs circle 4x4 mm Neodymium magnets 6pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
This isn't perfect or pretty but its functional, easy to print, and easy to mount. I had a very minor clog so you can see the burn marks on the mounts, whoopsie. I'll upload the Step file for anyone who wants to make it more efficient or…
Remix based on the Kirby Fume Extractor by jocoquemx to use a 9v and a 60x60mm fan. here the amazon links to the parts I used: switch 9V Batterie Clip 12V 60x60 fan Activated carbon filter sponge just cut it to a 60x60 rectangle squezze…
DO NOT DOWNLOAD THIS! Download the R2 instead! It is improved in everyway! R2 COMING SOONtm Update: Tightened up the usb port cut out on bottom_1 and fixed wk tops, Fixed plates, fixed wkl top 2 This is a 60% board designed to use…
A simple fan Mount for the Leviathan Board For the 35mm Spacer You need ~45mm long screws
A set of modular drawers I made to organize screws and other small parts, designed to print quickly in vasemode. I have only used the 1x1 variant, but the bigger ones may be useful to someone else Printing Instructions Print the shells…
This is a remix of LordDenos original HSW Holder but with 100mm height
The APX6000 is a radio commonly adopted in enterprise solutions and by emergency service organisations. It's useful to clip the radio to your belt and operate the radio via a wired microphone. We never seem to have enough belt clips for…
This is a holder for x60 Wypall wipes. It serves as a stylish way to store your wipes in your shop,lab or wherever you might need them. You can certainly put the holder directly on any work surface but the included wall mount keeps it out…
I remixed this model from the original Noctua design to fit into my Asrock Deskmini X600 with the Noctua NH-L9a-AM5 fan. It should be suitable for the AMD AM4 and L9i (Intel) version and Deskmini X300 as well. You just need 4x 20mm M3…
Warning: 280mm each direction, which most printers do not support. Spec'd as 60x60 from 2kHz to 16kHz, verified with measurements in anechoic chamber. 4-hole mounting screw holes 32.5mm from center. Mounted with screws in from the back,…
um etwas mehr Ordnung zu bekommen und alles griffbereit zu haben.
A Shirt collar reinforcement suitable for collars with a Dimension of 10mm x 60mm. Its 0,75mm high so use 0,25mm Layer Height. Normal Stiffer are 0,5mm thick, i made them a bit thicker so they are more reliable. German: Eine…
Lüfteradapter für Sunon Lüfter 60x60 auf 50mm Rohr
This mount allows you to have an OBD2 Gauge inside one of the vent of your MX5 MK2.5. I recommend using the driver side vent which is right above the OBD2 panel to root the cable behind the dash. I still need to find a solution to modify…
Designed to protect the motherboard and drivers when using an active chamber heater. The enclosure provides localized cooling for the heatsink and motherboard while minimizing airflow disturbance inside the heated chamber. Exhaust airflow…
Seitliche Abdeckung für Kabelkanal mit den Maßen 150x60cm.
This is simply printed without any supports
Sorting tray with funnel at corner to easily return small items to container. Nothing too fancy, here. Main area is about 100mm by 60mm, and pour spout is 30mm wide by 20mm long. Spout has ramp at front to facilitate sweeping objects into…
This stand was designed to hold the classic 110mm diameter tp-link deco mesh systems series (x10/20/50/55/60) Printed with 3 walls and 20% infill.
Original model created by Jallim Check out my own models and remixes: INSANEWAVE Also you can buy me a coffee: donation link
A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, this design uses 3mmx1.5mm magnets to keep your soldiers in ranks. This…
This is the “Rugged Box v3 60” for 35mm Slide Filament Samples (and also fitting my remixed 35mm Slide Infill Samples ) cut down to fit the bed of a Prusa Mini/+ or other smaller printer. There is also the option of a windowed top, so you…
Daszek/Zakończenie wsówany w słupek ogrodzeniowy o profilu 60x60mm... XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Roof/Termination inserted into a fence post with a profile of 60x60mm ... - Jeżeli chciałbyś zapoznać się z tym co robię na…
NZXT Kraken X60 AM4-Adapter To use the old watercooling AIO, I had to design a bracket to mount it to an AM4-socket. The original backplate and screws are reused. Use a 7mm drill to widen up the holes until you get a snug fit. printed in…
10″ Rack display holder for 7" HDMI Display ( USB Touch / 1024x600 ) FreeCad-File attached.
drilled cylinder infill 20% buildplate adesion: yes PRINTING TIME:15 MINUTES
Разъем для подключения колонок или сабвуфера Данную модель вы можете приобрести тут: https://cults3d.com/ru/3d-model/gadzhet/speaker-subwoofer-input-connector-70x60 Рекомендованный размер саморезов: 20x3 - 4 шт. Рекомендованный размер…
This adapter allows Tento 20x60 binoculars to be mounted to a Manfrotto/Bogen RC2 quick release clamp. I suspect it might also fit the Kronos 20x60, but I don't have one to test. eSun PLA+ 0.15mm layers 6 perimeters 60% grid infill The…
An easy to print and assemble winder tool for Makita line trimmers. After tearing a ligament in my wrist I've found it particularly painful to wind line onto my trimmer. This motivated me to build a tool to add some leverage and lighten…
I made a simple panel for mounting a 7-inch screen on my Rackmate T2 case, at least it can hold my screen now. There will be minor modifications later, hope everyone likes it. Change Logs: V2.0 adding FPC slot, adding more space for…
Case for a 7" touchscreen. The one I bought is from Amazon.ca: https://www.amazon.ca/gp/product/B075QCXLPF and seems similar to this one: https://wiki.52pi.com/index.php?title=EP-0087 but without the camera. The case allows full access to…
First trst of a wet mold leather tray
I wanted a way to keep my batteries organized and protected in this lipo bag I got on Amazon. This will fit a total of 12 Betafpv 550mah BT 2.0 batteries or similar, with some space for the Betfpv tester/charger and some cables.…
Head Phone holder that slides onto the upper rail of Asus ROG Strix Helios GX601 PC case.
Two diameters, 60x60 and 70x70 with screw holes.
Basic rack mounting rails for a Mellanox SX6036 switch. The switch side rails sit in a groove on the rack side rails, very similar to a French cleat. These are meant to be used as static rails. You will need to print two of each model. I…
Dimension: inner dimension : 60x60x30 outer dimension: 64x64x34 Please "Like", "Review" and “Comment” on the comment section if you like this design.
Enclosure and desktop stand designed to fit this specific touchscreen HDMI display from AliExpress. From what I can tell the model number is MPI7010. The display fits nicely in the case, and it feels solid when put together. Assembly just…
A simple Fan Duct for Asrock Deskmini X600 with Noctua NH-L9a-AM5
This design was made to prevent my DECO X50/X60 from overheating. It alllows a 60x15mm 12V fan to fit inside. This fan can be powered by soldering it on the 12V power socket on the motherboard of then DECO router. I personnaly used a…
Picatinny-Lampenhalter D15X60 Gemacht für Lampen, Laserpointer oder ähnliches mit einem Durchmesser von 15mm Lässt sich mit 2 Stück M4 Schrauben und Muttern an Picatinny befestigen. Enthält einen verdeckten Tunnel für einen kleinen…
IA Concepto de Diseño Este modelo presenta un diseño compacto y funcional ideal para cajas eléctricas utilizadas en edificios residenciales y comerciales. Está específicamente diseñado para acomodar canaletas de 20x10 mm. Propósito El…
Sunon 60x60x20 Fan Holder 2020 Extrusion m3 thread inserts are needed and fittet into the fan holes for this mod and 4x m3x30 screws. M5x20 screws for mounting it to the 2020 Extrusion Printer shown: https://github.com/gsl12/Tiny-M
kleine Dose mit Deckel
The hinges and locks will be published later.
You find these inexpensive cable ducts easily in any hardware store. Unfortunately you barely find end caps for them to buy. Most cable types won't last longer than few years if exposed to sunlight. So it is highly recommended to protect…
I needed two of those in fischertechnik blue to complete a model.
This test allows to test 4 colors print(ceter plate print) and alignement of the tools After print look for gaps between color sections
Proyecto en colaboración con Romero_3D para el diseño de una Impresora 3D con una superficie de impresión de 600x600x600mm, de momento sólo se trata de un diseño a falta de terminar.
Mades my first model since batteries for Thinkpad is expensive i made thin battery cover WORK IN PROGRESS MAY NOT FIT WELL Feel free to remix
